Rako RLED30BOOST Three or four channel booster module for RLED30CV4 and WLED30CV4

Description

RLED30BOOST Three or four channel booster module for RLED30CV4 and WLED30CV4

A booster module for long runs of 3 or 4 colour constant-voltage LED tape. When a run exceeds what the RLED30CV4+ or WLED30CV4 can drive, the booster takes the controller’s output signal and drives a further length of tape from the same base unit. It costs less than fitting extra controllers and keeps colour changes in sync.

Key features

• Driven by the PWM output of the RLED30CV4+ or WLED30CV4: not a programmable dimmer itself
• Up to 10 boosters per controller
• Reverse-polarity input protection, output current limiting and a 10A blade fuse

Specifications

• Dimensions: 172 x 46 x 40 mm
• Weight: 142 g
• Supply: 12V or 24V DC (separate LED driver required, sized to the load)
• Maximum load: 90W (12V, 3-channel), 120W (12V, 4-channel), 180W (24V, 3-channel), 240W (24V, 4-channel)
• Minimum load: 1W
• Housing: UL94-V0
• Standards: RoHS, UKCA, CE, EN 60669-2-5:2016

Downloads

• RLED30BOOST datasheet (PDF)
• RLED30BOOST instruction manual (PDF)